How to Disable Your Webcam (and Why You Should)

[javajolt]

Once a concern that was the province of the paranoid, years worth of reports and revelations have made it readily apparent that people really can (and do) spy on you through your webcam. Read on as we discuss why you should disable or cover your webcam, how you can do so, and review some handy products that can help make the job simple.

TL;DR version: Script-kiddie hackers and teenagers can, and do, use easily accessible tools and phishing techniques to hijack webcams of unsuspecting people, often who they know, and watch them through their camera. They can store images and videos of people in compromising situations in their bedrooms, and many of these images and videos are uploaded to shady websites.

If you have kids, you should strongly consider reading the entirety of this article and implementing something to stop their webcams from being on all the time (or ever).

Is Webcam Spying Really A Threat?

Ten years ago the idea that people, be they government agents, hackers, or just law-breaking voyeurs, could actively spy on you through your computer’s webcam would be the considered the ramblings of a paranoid conspiracy theorist at worst or a hypervigilant privacy advocate at best. A slew of news stories over the intervening years, however, have revealed that what was once considered paranoia is now an uncomfortable reality.

In 2009, a student sued his school when he discovered his school-provided laptop was secretly photographing him (the ensuing legal investigation revealed that the school had collected 56,000 photographs of students without their knowledge or consent). In 2013, researchers demonstrated that they could activate the webcam on MacBooks without the indicator light turning on, something previously considered impossible. A former FBI agent confirmed that not only was this possible but that they’d been doing it for years.

In 2013, courtesy of the documents leaked by Edward Snowden, we learned that the NSA had successful programs they used to gain backdoor access to the cameras on iPhones and Blackberries. In 2014, again courtesy of the Snowden leaks, we learned that the NSA has a host of tools at its disposal to remotely monitor users like “Gumfish”: a malware tool that allows for remote video monitoring via your webcam. In early 2015, a group known as BlackShades was broken up after it was discovered that the software they sold for $40 a pop had been used to give millions of purchasers remote access (including webcam access) to victims computers; that’s hardly a new trick though as old programs like Back Orifice were used in the same fashion back in the 1990s.

It’s Not Just the NSA

We want to emphasize the whole “hardly a new trick” bit and the ease with which even marginally skilled malicious users can gain access to your computer. This long-form article over at Ars Technica, Meet The Men Who Spy On Women Through Their Webcams, is an unsettling account that really drives home that the majority of people doing the spying aren’t government agents but low-tier hackers that use simple phishing tricks and malicious websites to net thousands upon thousands of computers and then, for little more than their own amusement in most cases, use simple tools to catalog and monitor all the devices they have access to.

So before you shrug your shoulders and say, “Well the NSA doesn’t care about my boring life, so it doesn’t matter,” understand that while we might all find allegations of government spying the most troubling on a global and intellectual level the majority of actual webcam spying is carried out by what amounts to creepy Peeping Toms.

Call them Remote Access Tools (RATs), call them Trojans, call them malware, regardless of the name there are clear and well documented examples in the wild that show you simply cannot trust that your webcam is only active when you’re snapping selfies or Skyping. Further, you can’t even trust the indicator light as the camera can be active without the light enabled.

So the short of it is: yes, webcam spying is a real threat. When everyone from the spooks at the NSA to the kid next door has access to tools that can turn a webcam against its owner then the threat is legitimate.

What Should I Do?

You should, no questions asked, disable or obscure your computer’s webcam. There is no good reason, especially in light of the numerous documented cases of webcam spying, to leave an insecure recording device permanently accessible and/or active on your computer.

Given the ease with which you can, in most cases, permanently disable or remove a webcam if you don’t use it (or use it infrequently) and the ease with which you can temporarily modify it to obscure the lens if you are a frequent webcam user, it makes little sense not to do so.

In the following sections we’ll highlight different methods (as well as their effectiveness, ease of use, and ease of reversibility) you can use to disable your webcam.

Make Sure You’re Using Antivirus

While antivirus isn’t going to detect all of these things, and won’t detect many of the latest ones that are out there, it will at least help in dealing with the possibility of infection through a link or running the wrong executable.

The problem is that if the threat is actually the college kid that offers to help people with their IT problems, they can easily whitelist a trojan so an antivirus won’t detect it. Or malware could do the same thing.

You can’t really trust that little icon that says you are secure. But it’s at least a help.

Unplug It

For desktop users with external webcams (which is 99%+ of the desktop machines with webcams) the easiest solution is to simply unplug the external USB web cam. No amount of hacking is going to magically plug an unplugged device back in.



This is the solution we use around the HTG offices; we leave the webcams in their usual position atop their respective workstation monitors and then when we need to use them we plug the USB cable into an easily accessible front or top USB port on the said workstation.

It’s the most foolproof way to approach the problem if you have an external webcam and works regardless of the hardware or operating system.

Disable It in the BIOS

This option is only viable for laptops with integrated webcams (and those rare all-in-one desktop models that also sport integrated webcams in the monitor frame). In order to disable the webcam via the BIOS, the BIOS and the hardware must support such a function.

Reboot your computer and enter into the BIOS (follow the onscreen instructions, typically you access the BIOS by pressing the F2 key, the DEL key, or a function key combination of some sort). Look through the BIOS options for an entry labeled something like “webcam,” “integrated camera,” or “CMOS camera.” These entries will typically have a simple toggle like enable/disable or lock/unlock. Disable or lock the hardware to turn off your webcam.

Unfortunately the BIOS solution is relatively rare and typically found on computers from vendors with heavy institutional sales. Dell and Lenovo laptops, for example, commonly ship with this feature in the BIOS because their corporate buyers want the ability to lock/disable the webcam. With other vendors (and even within computer lines from the aforementioned vendors) it’s hit or miss.

Be forewarned that disabling the webcam typically disables the microphone too as in most laptops the camera and microphone module are on the same small expansion board. This is obviously a benefit (from a privacy standpoint) but you should be aware of it so you’re not left wondering why your mic is dead.

Disable It in the OS

This solution isn’t quite as secure/foolproof as disabling the webcam in the BIOS but it’s a welcome next step. You can cripple your webcam by disabling it and removing driver support for it.



The technique for doing so varies from operating system to operating system, but the general premise is the same. In the screenshot above you can see the Windows Device Manager; there you can locate your webcam under the “Imaging Devices” category and disable it and/or outright remove the device from the roster of devices on your machine.

Obviously this isn’t a perfect solution. If someone has remote administrative access to your machine they can always, with a greater or lesser degree of hassle, install the missing drivers and enable the device again.

Barring that kind of focus and determination, however, it’s a simple and easy way to disable your webcam. At the same time it is rather inconvenient if you actually use your integrated webcam with any regularity. This brings us to the next solution, obscuring the lens with a cover.

Cover It Up

A compromise between the hassle of disabling the the webcam in the BIOS or operating system and leaving it wide open all the time is applying a simple physical cover to your webcam lens. As elementary and simplistic as it seems it’s actually a really effective technique. You get instant visual confirmation the lens is disabled (you can see the cover every time you look at your laptop), it’s easy to remove, and we even tried out some dirt cheap DIY options that keep the cover-up option economical.

Presented below, for reference, is the laptop we’re using without any of the solutions (commercial or DIY) applied. The indicator light is on the left, the webcam lens is center, and the microphone is on the right.



Before you run off to grab a roll of duct tape, let’s run through the commercial and DIY options we’ve reviewed on your behalf. Our methodology was straight forward. We looked at the best selling “webcam privacy” devices on Amazon, ordered the most popular devices, and then tested them on your behalf. As long as they worked (the webcam was rendered unable to create a partial or blurry image) we included them here with our review notes.

Eyebloc Cover (~$6)

This was the first search result, the best selling, and the most reviewed product on Amazon. The design is really simple: it’s a C-shaped plastic clamp that you slip onto your laptop (it can also be applied to tablets and smartphones in a similar fashion).



No doubt about it, it was easy to apply, easy to remove, and like advertised it had no adhesive to speak of (so there was no risk of residue). It also completely blocked the webcam lens on all devices we tested it on. That said, this thing is really, really, ugly and obvious. In terms of style we’d rank the Eyeblocright up there with the massive fit-over-sunglasses you’d see around a retirement community.



This is also the only device we tested that won’t work very well for smart TVs, game consoles, or any other larger device that has a webcam-like device built in. If you’re not attaching it to a slender object like a laptop lid or tablet, it won’t work.

C-Slide (~5)

The C-Slide is a tiny (and we do mean tiny) plastic slider that you adhere onto your laptop or tablet. The entire device is the size of a very small mailing label (1.4″ x 0.5″ and a scant 1mm or so thick). It’s so tiny, in fact, that it was delivered stuck to a piece of cardstock in a common #10 business envelope and the outside of the envelope had “Your webcam cover order is inside!” in large highlighted print to, presumably, ensure we didn’t scrap it as junk mail.



Unlike the other solutions in this roundup the C-Slide is intended for permanent application to the device. You enable and disable the webcam by sliding the tiny little panel of plastic back and forth to open and close the webcam much like some larger external webcams have a physical slider that covers the lense when not in use.

Despite our misgivings about how tiny the C-Slide is it worked quite well. It’s so slim that you can easily close the laptop without any noticeable gap between the lid and body. There were only two issues we found with the C-Slide.



First, if you have a laptop that has a curved bezel it does not adhere very well and will likely fall off immediately (or shortly after application). Second, you’ll want to place it very carefully so that it doesn’t accidently stick over the microphone hole on your laptop or cover the indicator light. Second, before you peel the double-sided tape off the back and slap it on, take a minute to experiment with placement. Our initial placement was less than idea as it blocked the indicator light and resulted in a blocked microphone when the slider was open. By offsetting the opening in the slider slightly from the webcam lens we were able to position the device such that the microphone wasn’t obscured or taped over and the only time the indicator light was blocked was when we had the slider open to use the webcam.

Those minor issues aside, the C-Slide will work on any camera embedded in a flat surface so long as the camera lens is smaller than the roughly square centimeter opening of the slider (approximately the size of the nail on your pinky finger). Overall this was our favorite solution. It’s easy to apply and it’s easy to use: no picking at a little sticky disk and no misplaced parts.

Creative Cam Covers (~$10 for 6)

The Creative Cam Covers feel and look very similar to cut vinyl decal clings like those you would order from a sign shop or purchase to peel out and stick on your car window. The pack comes with an alcohol wipe and six black circular stickers roughly the size of a dime.



Stickers is actually a bit of a misnomer here because, as we alluded to above, they’re made out of the same material as vinyl window clings. They have no adhesive but instead use static electricity to cling to smooth surfaces.

This is both a benefit (no sticky residue and they’re easy to remove) and a flaw (they work great on smooth surfaces but not so great on textured ones). As such they work super well on laptops with glossy piano black bezels and tablets that have smooth glass bezels, but if your laptop is brushed aluminum (like a MacBook) or just has a rough texture on the bezel, you may find they readily fall off.



In light of that we can only recommend the product for those situations: super smooth and flat laptop bezels or glass surfaces like those found on tablets. None of our laptops have a gloss case and the Cam Covers would not stick (even for a fraction of a second) to the bezel of the laptop we used for demonstration purposes in this article. They did, however, stick incredibly well to the perfectly smooth glass surface of our iPad mini, as seen in the photo above. If you’re looking for a non-adhesive solution for a tablet or laptop with a gloss bezel this is a great solution.

DIY Electrical Tape Covers (< $1)

While field testing all these solutions, it occurred to us that if you weren’t afraid of a tiny bit of adhesive then the cheapest solution would be to simply punch a hole in a piece of electrical tape with a hole punch and you’d have a perfectly round little dot you could place right over the lens of your integrated webcam.

Note: we used white electrical tape for this review specifically because it doesn’t blend into the frame of the laptop so you could see it better; we recommend using plain old black electrical tape for a nearly invisible installation.

A quick trip to the old supply closet for some tape, a hole punch, and FedEx label (to steal a bit of the non-stick paper backing) and we had the fixings for hundreds of webcam covers.



All this little DIY trick requires is that you unroll a few inches of the tape onto the non-stick paper, work a hole punch down the strip of tape punching out as many little electrical tape dots as you need, and then peel and stick them wherever you need them.

The only downside to this technique is that, yes, you’ll potentially have a little adhesive to deal with when removing the dot (although this is mostly a temperature-related issue as in cooler temperatures the dot peeled up cleanly) and it would be easy to lose or mangle the little dot of tape if you were using it while traveling about. Given how cheap they are to make you could easily stash a few in your laptop bag.

htg