An aspect of solid state drives that is being explored more recently is the number of form factors into which you can fit them. While mechanical hard disks have a very specific set of dimensions they need to fit into, SSDs have no such problems. The 2.5” SSDs that we get today are really only in that form factor because that's what our machines have largely standardized to, but as Apple's recent MacBook Air refresh has proven, you can fit an SSD pretty much anywhere these days. So it is with Viking Modular's new SATADIMM SSD drive.

Regular users with a healthy number of drive bays to spare are less likely to see the value of a drive like this, but modders working with MiniITX enclosures and enterprise users looking to add capacity to a blade server are likely going to be much more excited about this new SSD form factor. Simply put, Viking Modular has created an SSD that mounts to a DDR3 slot. Sure, you still need to connect a SATA cable, but besides that you have an SSD that occupies very little space and draws all of its current from the DIMM slot.
That enterprise space is really where the SATADIMM is going to shine. Enterprise motherboards are often loaded to the gills with DIMM slots, but finding space to mount 2.5” hard drives is another matter entirely. By creating an SSD that can fit into and be powered by a DIMM slot, Viking Modular has provided a very useful alternative in adding capacity to a server without sacrificing valuable space.
The SATADIMM utilizes an enterprise-class SandForce SF-1500 series controller (also available with an SF-1200) and is shipping in capacities of 25GB to 200GB for the SLC version, and 50GB to 400GB for the eMLC and MLC drives. Our review model is the VRFSD1200GBCSM, the 200GB MLC iteration of the drive. At this time, the SATADIMM is only available to OEMs and through enterprise sales channels.
Aesthetics
If you didn't know any better, you'd think the SATADIMM was a regular stick of memory, but that SATA connector at the top should clue you in. Nonetheless, it's designed to snap into place just like a conventional DDR3 DIMM. The SATADIMM is basically two parts, the main board with the flash, SATA connector, and SandForce controller, and a daughter board that handles power regulation.
Outside of being slightly thicker than your average DDR3 memory module, the SATADIMM blends in perfectly with other sticks of RAM.
Disassembly
With the SATADIMM there isn't really anything to disassemble: the cards are all on the table from the get-go, with the flash modules readily visible along with the SATA interface and the SandForce controller chip. The daughter board can be removed, exposing three micro-connectors that feed power into and out of the power regulation daughter board.
The Viking SATADIMM 200GB drive is powered by a SandForce SF-1565TA3-SBH enterprise controller and it is paired up with sixteen 16GB Micron 29f128g08cjaba flash modules. With how well space is used on this small SSD, I don't think there is really any wasted volume at all.

viking-ssd-dim-bottom

viking-ssd-dim-top
Synthetic Benchmarks
It'll be interesting to see how the SandForce controller on the SATADIMM holds up; unlike standard SandForce-based SSDs the SATADIMM's specs are comparatively conservative. We employed our usual test bench, a Dell XPS 9000 with drives benchmarked through the 3.0Gbps Intel ICH10R SATA controller, running in AHCI mode with TRIM enabled. We use Microsoft Windows 7 Home Premium 64-bit.
In this review we're comparing the 200GB SATADIMM with Viking Modular's 120GB 2.5" enterprise-class SSD, the OWC Mercury Extreme Pro (fastest SF-1200 SSD) and the Intel X25-M.
Our synthetic benchmarks are done using IOMeter and CrystalDiskMark to get a general feel for performance before launching into real world testing. For testing SSDs, we use the standard 512-byte test alongside a 4K test.
I find benchmarks boring and irrelevant, but for those of you who like them they are
here or follow the link at the bottom right of this review.
Power Consumption
Unfortunately, as a result of the SATADIMM's unique form factor, we weren't able to test its power consumption. Suffice to say, if it can survive just drawing juice from a DDR3 slot and still provide performance comparable to standard form factor SandForce SSDs, it's probably fairly negligible.
Conclusion
Admittedly reading about the SandForce flavor of the week can get a little dry, but the Viking Modular SATADIMM brings something else to the table. Simply put, the SATADIMM is a lot smaller than a conventional drive, and its form factor and unique mounting mechanism – being able to sit in a DDR3 slot and survive off of 1.5 volts – are what make this a most interesting product.
Where it gets compelling is that the change in form factor is the only appreciable difference between the SATADIMM and Viking Modular's other SandForce SF-15drive. The OWC Mercury Extreme Pro we tested it against is our go-to SandForce drive, largely best of breed, and the SATADIMM was able to perform nearly identically. The differences in pure numbers are largely academic. In fact, Viking Modular's spec sheet largely understates the performance of the SATADIMM, enough that we had to doublecheck to make sure it was using a SandForce controller.
So again, that leaves us with a SandForce drive in what amounts to a unique form factor. In the enterprise, where physical space can be at a real premium, something like the Viking's SATADIMM can make a heck of a lot of sense.
Pros
• Performs as well as the best SandForce drives we've seen
• Compelling form factor for enterprise audiences
• Operates off of just 1.5v from a DDR3 DIMM slot
• Plenty of capacity and NAND combinations to satisfy the market
Cons
•
Limited availability - reserved for the enterprise market, not enthusiasts
Bottom Line
If you're hurting for space or looking for a way to boost fast storage in an enterprise environment without having extra drives taking up space, the SATADIMM gets the job done with both style and speed.
source:storagereview